PCB SMT & Through-Hole Rework for Napier

Luke and the team do a amazing job. Extremly happy from start to finish

Delivered excellence on time, great work and great team, thanks!

Luke and the team do a amazing job. Extremly happy from start to finish

COLETEK proved to be the perfect choice to help us kick our project off. Their analysis of the problem we presented with them with, and their suggestions for the most efficient and effective way to achieve a solution prevented us wasting time and money heading down the wrong path. I'd recommend COLETEK without any reservations.

I can say that I've only dealt once with Luke Cole at COLETEK and I found him to be very professional and helpful with his assessment of my device. His expertise and suggestions with regards to my invention was great, despite my pedestrian review of it and what I was hoping it could achieve. In the end his advice was paramount in my final decision as to whether I would move forward with the development of a prototype.

Salita engaged Luke Cole to troubleshoot issues we were having with a drive motor system with a dynamic variance of torque and speed. After approaching no less than a dozen Australian supplier and engineering firms to provide a solution, and after 12 months of product design and testing, they could not verify why their recommended motors where failing and reversing suddenly. Luke undertook testing and analysis and quickly supplied information on the failures. Not only did Luke uncover a rare, uncommon failure but also provided a solution. The COLETEK team are our go to for the correct solution the first time, for all our electronic needs.

Luke has a very broad depth of knowledge across many engineering disciplines and has a large project base to draw experience from. I engaged COLETEK for assistance in some early electro-mechanical design for a hoisting system. They've been a great resource for helping develop ideas.

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

Great delivery, and great relationship orientated services.

I had a technical design and prototype job I needed done and had contacted two companies in Brisbane before I discovered COLETEK. From my first conversation with Luke, I knew that he was the best person for the job and he delivered under budget and within the required timeframe. The device he manufactured for my company will save us thousands of dollars and it is highly likely that we will on-sell the device to similar organisations. I recommend COLETEK for any design and prototype work you can imagine for your business.

After approaching COLETEK with a few sketches of a plumbing tool I had in mind Luke and I immediately bounced a few ideas around. Leaving things with Luke he quickly produced some 3D images and ideas we subsequently used. Before long COLETEK produced an operational 3D printed prototype of the tool. I was then able to use this prototype to seek funding for further research and development.

I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.

Luke from COLETEK has assisted us on a number of occasions and has always been helpful, courteous and understanding of our needs. There was an instance when timing was of the essence and Luke was able to prioritise our job to ensure we weren't affecting our customers in a negative way. He is highly recommended.

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

We've worked with Luke and the team on and off for the past two years. We've found them very accessible and extremely thorough in their dealings. Their documentation is second to none and we’d have no hesitation recommending them on this basis alone.

We had the opportunity to work with Coletek on the re-work of some complex SMD PCB assemblies during 2019. The work was carried out to a very high standard and we were extremely pleased with the outcome. We would not hesitate to recommend COLETEK for any type of complex technology work requiring high accuracy and professionalism.

In the development of our new product Smart Syphon we had a tight deadline to launch the commercial version of our product and experienced some issues with our drawings. Luke and his team dealt with the issues, worked through the week-end and delivered a quality outcome on time.

I have had the pleasure of working with Luke, our exceptional robotic product developer, over the past few years. Luke's expertise and professionalism have been pivotal in advancing our projects. Their innovative approach, attention to detail, and commitment to excellence have consistently exceeded our expectations. The quality of work and dedication Luke brings to each level of our project has significantly contributed to our success. I highly recommend COLETEK for their outstanding skills and unwavering professionalism.

I'm in the early stages of my prototype design. I have worked with Luke for a couple of years now and in that time I have found Luke to be very reliable, responsible with my design, honest and trustworthy. What stood out the most was Luke's pride and commitment that he undertakes to ensure a positive outcome. I consider it a privilege to call Luke an associate and have no hesitation in encouraging others to do the same.

I recently discovered COLETEK after I accidently managed to fry the PCB on my hard drive. The drive contained 13 years worth family photos and wasn't comfortable sending it off where it could be damaged more or lost in the post. After spending hours researching and emailing different data recovery companies, I decided on COLETEK. Luke was very helpful and let me know the estimated costs up front, and was able to quickly do the repairs necessary to get my drive running like new again. I was able to back up the whole drive and the bill ended up cheaper than the original quote. I can highly recommend them and have already sent a friend to get their drive repaired too.

I'm in the early stages of my prototype design. I have worked with Luke for a couple of years now and in that time I have found Luke to be very reliable, responsible with my design, honest and trustworthy. What stood out the most was Luke's pride and commitment that he undertakes to ensure a positive outcome. I consider it a privilege to call Luke an associate and have no hesitation in encouraging others to do the same.

From an idea in my head to making sales nationwide and now worldwide. COLETEK were there every step of the way. The product was my first development so I had no idea really. With COLETEK offering privacy agreements and steering me in the right direction, it gave me confidence instantly. One thing that may seem irrelevant they questioned me about what it was I was trying to achieve and if in fact if it's even viable? That for me showed COLETEK wasn't in it just for my money. After some meetings and a couple of CAD drawings we had our first working prototype. COLETEK's knowledge and experience definitely made this whole process a lot easier. From CAD drawings, prototypes, liaising with suppliers in Australia and overseas - COLETEK done the lot. I'd highly recommend COLETEK!

We met with Luke Cole from COLETEK and very quickly realised that he was very knowledgeable in robotics and prototyping. What separates his company from the rest, is that he had a unique value proposition - COLETEK offers a tele-operated / robotic unit for rent and with the flexibility to be modified to build proof-of-concepts. That unit lowered both the cost and time for us to produce a video showing a very challenging concept. In general COLETEK's service was great value. We would recommend them - they will get it done.

Great prototype product made to our specs with minimal fuss. Delivered on time and within budget. Thanks team.

I would thoroughly recommend COLETEK they provided me with excellent feedback and engineering knowledge with regards to our idea. They also have continued to help us with what direction we should take and introduced us to other professionals that have also guided us. I suggest anyone who has been thinking of something they would like to pursue should contact them to get the most realistic approach of making it successful.

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

Luke has a very broad depth of knowledge across many engineering disciplines and has a large project base to draw experience from. I engaged COLETEK for assistance in some early electro-mechanical design for a hoisting system. They've been a great resource for helping develop ideas.

Thank you for your recent help with my enquiry. I have been able to proceed with my project which was proving very difficult before I was fortunate enough to make your acquaintance. The help you have given me and the contacts I have made with your support has been invaluable. Thank you so much and I look forward to a long and fruitful association.

After approaching COLETEK with a few sketches of a plumbing tool I had in mind Luke and I immediately bounced a few ideas around. Leaving things with Luke he quickly produced some 3D images and ideas we subsequently used. Before long COLETEK produced an operational 3D printed prototype of the tool. I was then able to use this prototype to seek funding for further research and development.

We used COLETEK on a small project involving mechanical and electronic design aspects as well as software development. COLETEK understood our requirements at the outset and worked to accommodate our needs. The whole process was professionally conducted and we highly recommend COLETEK

Our dealings with COLETEK were pleasant and professional. Luke was kind and courteous and very easy to talk to. High quality design concepts were emailed through with regularity so that we always knew exactly what was going on. I would recommend supporting hard workers and local Australia business by working with COLETEK

I used COLETEK for the design and prototyping of a new medical airway device I invented. They were enthusiastic, responsive to my input and I was very satisfied with the product they gave me. I can strongly recommend their services.

We had the pleasure of doing business with COLETEK who provided us with service work. Their level of service and the quality of their work is exceptional. They communicated with us through the entire process to let us know when the work would be completed. We are very happy to have worked with them.

I consulted COLETEK for some work, commencing in 2014, and haven’t looked back. The project was very important to me, and COLETEK not only saw that but exuded sincere enthusiasm about the project; they are attentive, and thorough in their research and development service. They are a wealth of information and advice, for many aspects of the entire engineering and commercialization space, and this has been invaluable to me. I look forward to continuing work with them long into the future!

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

We met with Luke Cole from COLETEK and very quickly realised that he was very knowledgeable in robotics and prototyping. What separates his company from the rest, is that he had a unique value proposition - COLETEK offers a tele-operated / robotic unit for rent and with the flexibility to be modified to build proof-of-concepts. That unit lowered both the cost and time for us to produce a video showing a very challenging concept. In general COLETEK's service was great value. We would recommend them - they will get it done.

I consulted COLETEK for some work, commencing in 2014, and haven’t looked back. The project was very important to me, and COLETEK not only saw that but exuded sincere enthusiasm about the project; they are attentive, and thorough in their research and development service. They are a wealth of information and advice, for many aspects of the entire engineering and commercialization space, and this has been invaluable to me. I look forward to continuing work with them long into the future!

I used COLETEK for the design and prototyping of a new medical airway device I invented. They were enthusiastic, responsive to my input and I was very satisfied with the product they gave me. I can strongly recommend their services.

I have had the pleasure of working with Luke, our exceptional robotic product developer, over the past few years. Luke's expertise and professionalism have been pivotal in advancing our projects. Their innovative approach, attention to detail, and commitment to excellence have consistently exceeded our expectations. The quality of work and dedication Luke brings to each level of our project has significantly contributed to our success. I highly recommend COLETEK for their outstanding skills and unwavering professionalism.

I engaged COLETEK several years ago to produce designs and working prototypes of 2 products I am currently developing as I was having difficulty obtaining what I required from overseas design companies. I have always found Luke easy to work with and having face to face meetings made explaining my concepts so much easier than endless emails. Design changes and modifications are always produced in a timely fashion and available for pickup locally.

We worked with Luke from COLETEK to develop a prototype for a new venture. Luke was able to give us practical advice on how to execute the project inline with our budget that was super useful. What has been endearing, is that even after the build was complete, Luke continues to touch base with us offering help to keep the momentum of the project going forward.

Excellent service quick response and great results and reliability.

Our company has been working with COLETEK and Luke Cole for several years. Luke is very intelligent in many areas and has provided us with excellent designs and service. With the addition of a marketing section to provide brochures, packaging, etc. COLETEK is a one-stop shop. Based on our experience, we would highly recommend Luke and his company.

Salita engaged Luke Cole to troubleshoot issues we were having with a drive motor system with a dynamic variance of torque and speed. After approaching no less than a dozen Australian supplier and engineering firms to provide a solution, and after 12 months of product design and testing, they could not verify why their recommended motors where failing and reversing suddenly. Luke undertook testing and analysis and quickly supplied information on the failures. Not only did Luke uncover a rare, uncommon failure but also provided a solution. The COLETEK team are our go to for the correct solution the first time, for all our electronic needs.

We worked with Luke from COLETEK to develop a prototype for a new venture. Luke was able to give us practical advice on how to execute the project inline with our budget that was super useful. What has been endearing, is that even after the build was complete, Luke continues to touch base with us offering help to keep the momentum of the project going forward.

In the development of our new product Smart Syphon we had a tight deadline to launch the commercial version of our product and experienced some issues with our drawings. Luke and his team dealt with the issues, worked through the week-end and delivered a quality outcome on time.

Excellent service quick response and great results and reliability.

Great prototype product made to our specs with minimal fuss. Delivered on time and within budget. Thanks team.

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.

We had the pleasure of doing business with COLETEK who provided us with service work. Their level of service and the quality of their work is exceptional. They communicated with us through the entire process to let us know when the work would be completed. We are very happy to have worked with them.

Intuitive, innovative & efficient are three words that would appropriately describe the COLETEK service. Luke and the team at COLETEK have taken our concepts to the next level.

Luke (COLETEK) did an amazing job helping me take an idea through technical design, proof of concept and prototype development. Luke immediately understood the requirements, delivered to a budget, within the required timeframe and the whole process was extremely professional. I highly recommend for any design and prototype work you can imagine.

I had a technical design and prototype job I needed done and had contacted two companies in Brisbane before I discovered COLETEK. From my first conversation with Luke, I knew that he was the best person for the job and he delivered under budget and within the required timeframe. The device he manufactured for my company will save us thousands of dollars and it is highly likely that we will on-sell the device to similar organisations. I recommend COLETEK for any design and prototype work you can imagine for your business.

I can say that I've only dealt once with Luke Cole at COLETEK and I found him to be very professional and helpful with his assessment of my device. His expertise and suggestions with regards to my invention was great, despite my pedestrian review of it and what I was hoping it could achieve. In the end his advice was paramount in my final decision as to whether I would move forward with the development of a prototype.

We had an idea that needed very complex design and prototype requirements. After much frustration dealing with other prototyping companies both in Australia and overseas we came across Coletek and have not looked back. Luke has been extremely helpful to date and we are now on the road to developing the product we had envisioned. Luke has been more than capable of taking multiple and constantly changing design facets in his stride and has ultimately given us a clear path to a successful product.

We had an idea that needed very complex design and prototype requirements. After much frustration dealing with other prototyping companies both in Australia and overseas we came across Coletek and have not looked back. Luke has been extremely helpful to date and we are now on the road to developing the product we had envisioned. Luke has been more than capable of taking multiple and constantly changing design facets in his stride and has ultimately given us a clear path to a successful product.

Delivered excellence on time, great work and great team, thanks!

We had the opportunity to work with Coletek on the re-work of some complex SMD PCB assemblies during 2019. The work was carried out to a very high standard and we were extremely pleased with the outcome. We would not hesitate to recommend COLETEK for any type of complex technology work requiring high accuracy and professionalism.

Thank you for your recent help with my enquiry. I have been able to proceed with my project which was proving very difficult before I was fortunate enough to make your acquaintance. The help you have given me and the contacts I have made with your support has been invaluable. Thank you so much and I look forward to a long and fruitful association.

I would thoroughly recommend COLETEK they provided me with excellent feedback and engineering knowledge with regards to our idea. They also have continued to help us with what direction we should take and introduced us to other professionals that have also guided us. I suggest anyone who has been thinking of something they would like to pursue should contact them to get the most realistic approach of making it successful.

Great delivery, and great relationship orientated services.

Our dealings with COLETEK were pleasant and professional. Luke was kind and courteous and very easy to talk to. High quality design concepts were emailed through with regularity so that we always knew exactly what was going on. I would recommend supporting hard workers and local Australia business by working with COLETEK

As the proprietor a DIY environmentally pest control products business I have been more then impressed with COLETEK's design capability and professionalism in assisting to realise an idea into reality. From concept, CAD drawings, 3D modelling, alterations right through to the finished product. I am extremely happy with our new termite control product. I have no hesitation in recommending COLETEK's services.

We used COLETEK on a small project involving mechanical and electronic design aspects as well as software development. COLETEK understood our requirements at the outset and worked to accommodate our needs. The whole process was professionally conducted and we highly recommend COLETEK

Luke from COLETEK has assisted us on a number of occasions and has always been helpful, courteous and understanding of our needs. There was an instance when timing was of the essence and Luke was able to prioritise our job to ensure we weren't affecting our customers in a negative way. He is highly recommended.

We've worked with Luke and the team on and off for the past two years. We've found them very accessible and extremely thorough in their dealings. Their documentation is second to none and we’d have no hesitation recommending them on this basis alone.

I engaged COLETEK several years ago to produce designs and working prototypes of 2 products I am currently developing as I was having difficulty obtaining what I required from overseas design companies. I have always found Luke easy to work with and having face to face meetings made explaining my concepts so much easier than endless emails. Design changes and modifications are always produced in a timely fashion and available for pickup locally.

Our company has been working with COLETEK and Luke Cole for several years. Luke is very intelligent in many areas and has provided us with excellent designs and service. With the addition of a marketing section to provide brochures, packaging, etc. COLETEK is a one-stop shop. Based on our experience, we would highly recommend Luke and his company.

I was grateful to find Luke Cole at COLETEK in the early days of an invention idea. He was very patient and generous with information to guide me along the way. And even though I did not preceed with my project, I would still recommend his services. Thank you.

I have been working closely with COLETEK for the past 6 years now, and I must say, it is a success story :-). I highly respect their team, they are a pleasure to work with and top skilled professionals. In addition to their top Technical service, their customer service is brilliant and it is a rare find. Their PCB repair rework skills are top notch and a rare find in this industry. I have been working in the IT industry for the past 20 years in various fields and seen it all so I can say with certainty that they are the best around and I am looking forward to keep working with them in the future.

COLETEK proved to be the perfect choice to help us kick our project off. Their analysis of the problem we presented with them with, and their suggestions for the most efficient and effective way to achieve a solution prevented us wasting time and money heading down the wrong path. I'd recommend COLETEK without any reservations.

From an idea in my head to making sales nationwide and now worldwide. COLETEK were there every step of the way. The product was my first development so I had no idea really. With COLETEK offering privacy agreements and steering me in the right direction, it gave me confidence instantly. One thing that may seem irrelevant they questioned me about what it was I was trying to achieve and if in fact if it's even viable? That for me showed COLETEK wasn't in it just for my money. After some meetings and a couple of CAD drawings we had our first working prototype. COLETEK's knowledge and experience definitely made this whole process a lot easier. From CAD drawings, prototypes, liaising with suppliers in Australia and overseas - COLETEK done the lot. I'd highly recommend COLETEK!

COLETEK have provided one to one communication throughout the development process and gone above and beyond in bringing our ideas closer to becoming a reality! Luke's expertise and knowledge with computer software and electronics is Jedi like, but what I liked most about working with him was his willingness and ability to think outside of the box.